4 posts tagged with "2.0"

Changelog​

Improvements​

• Improved visual indication of Diagnostic log settings.

Bugfixes​

• Resolved an issue with password protected files that prevented WeConfig from opening them when the first zip entry was not protected.
• Resolved an issue that caused some settings to to show that they had been applied in the backstage settings view.

Changelog​

Improvements​

• Limited the available Authentication and Privacy methods available for selection in Device Access / SNMP to those actually supported by the device, when it is known.

Bugfixes​

• Resolved an issue with SNMPv3 communication that prevented WeConfig from communicating with certain devices.
• Resolved an issue that caused WeConfig to crash when a device presented with an IPv6 address and an IPv4 netmask.

Changelog​

Improvements​

• Forced IPConfig-based discovery to run SNMP to obtain more WeOS4 information.
• Adjusted margins of the "Availability Status" column in the device list for better alignment.
• Improved WeConfig's ability to detect port types on WeOS 5.
• Adjusted the way WeConfig detects if two devices are the same to avoid an issue with alternating host-key post firmware-upgrade.
• Ensured that the Settings page is scrollable when the window is to small to contain all settings.

Bugfixes​

• Resolved an issue where MRD's and BRD's did not behave well during Basic Setup.
• Resolved an issue with FRNTv2 Deserialization from old project files.
• Resolved an issue that caused duplicate firmware upgrade steps to occur when upgrading past 5.21.1 and 5.22.x.
• Resolved an issue where updating the network topology too quickly in succession caused a crash.

Updated Graphical User Interface​

Dark Mode Support​

• Introduced support for dark mode.

Dockable Elements​

• Enabled docking for all panels and elements.

Enhanced Selection Mechanics​

• Reworked the way that WeConfig handles selection, "Add" and "Clear" buttons have been removed in favor of directly matching the selection in Physical Network / Devices.

New Panels​

Discovery​

• Interface-Based Device Discovery: Relocated from the top bar to its own panel.
• ICMP Ping Discovery: Relocated from the top bar to its own panel.

Configuration​

• Firewall: Introduced a new firewall configuration panel.
• Routing/OSPF: Licensed feature. Provides detailed OSPF configuration for devices.
• Routing/Static: Licensed feature. Allows configuration of specific static routes.
• Aggregates: Enables LACP configuration.

Per-Device Views​

• Route Table: Relocated from the Selected Device section.
• Properties: Relocated from the Selected Device section.
• Attachments: Relocated from the Selected Device section.
• Configuration Files: Relocated from the Selected Device section.
• Cellular: Relocated from the Selected Device section.

Maintenance​

• Clone or Replace Device: Replaces the Paste and Replace function.

Support​

• Issues: Collects and displays application and device issues.

Reworked Panels​

Network Visualization​

• Physical Network: Includes Layer 3 visualization, updated connection colors, ribbon controls, new indicators, and new context menu options.
• Devices: Removed Backup, Bootloader, MAC, and other columns.

Configuration​

• Accounts: Reworked to represent the configuration of user accounts on the device, not just admin password configuration.
• VLAN: Merged tabs into a matrix view.
• System/SNMP: Now a Staged Task.
• System/Logging: Now a Staged Task.

Maintenance​

• Firmware Upgrade: Now a Staged Task.
• Device Access Settings: Allows editing of the username and PKI usage. Test connection now also tests SSH, SNMP, and HTTP(S) reachability.
• CLI Scripts: Renamed from "CLI".

Diagnostics​

• Diagnostics: Uses a new charting framework. Measurements are split per unit. Select measurements, rather than device/measurements.

Support​

• Help: Now links to the user guide.
• Release Notes: Now links to the relevant changelog.
• Reports: Now a licensed feature. Is now a panel and includes a progress log.

Tools​

• SHDSL Reach Calculator: Uses a new charting framework.

Project Template​

• Export from Current Project: Now a Staged Task.
• Build Network from Template: Now a Staged Task.

Changelog​

• Accounts (previously passwords) now have a quick-button for generating and copying a public/private key pair to the clipboard.
• "On approval" is now the default update option.
• Added "Never" as an update option.
• Added Dark mode and system theme.
• Added Discovery Neighbours as a discovery option to both ICMP and interface-based discovery.
• Added Expand/Collapse functionality to physical network.
• Added Opacity Controls to physical network.
• Added a periodic ping check that tries to reach devices in the project.
• Added a search box to physical network.
• Added actual toast for notifications.
• Added an icon to physical network that indicates that a firmware upgrade is available for the device.
• Added backstage menu..---------------------------------------------------
• Added context menu options for RIP, OSPF, and static routes.
• Added favorites list.
• Added firewall configuration panel.
• Added full docking layout handling.
• Added icons to all panels.
• Added observable ingress/egress rates to Configuration/Ports/Ethernet.
• Added read support for HSR-PRP and redbox.
• Added spinners to clickable links.
• Added static route configuration.
• Added licenses for unlocking/locking features, with an option for temporary trial licenses built into the software.
• Added the ability for WeConfig to proxy SSH connections via WeOS devices.
• Added the ability to download missing firmware directly in Firmware Upgrade.
• Added the ability to edit manually edited connections.
• Added the ability to mirror device locations across X/Y axis in physical network.
• Added the ability to remove FRNT rings.
• Basic setup now allows empty host names.
• Connection colors have been updated to match with other Westermo resources.
• Deleted Configuration Baselines panel.
• Deleted Configuration Manager panel.
• Deleted logical network.
• Device access: For devices supporting PKI authentication, PKI authentication can now be enabled or disabled.
• Device properties now contain hardware revision when applicable.
• Devices, sorting by IP address now sorts numerically rather than alphabetically.
• Diagnostics now only need to select measurements, not measurements per device.
• Discovery: When detecting an unknown device through LLDP, WeConfig will now add its known port information to the device.
• Dropped support for project files of versions lower than 3.0.
• Fixed a bug involving reading SFP diagnostics.
• Fixed a bug where 192.168.2.200 would remain configured on WeOS 4 devices after basic setup was complete.
• Fixed a bug where local firmware files occasionally would not show up in Firmware Upgrade.
• Fixed an issue with "fill" zooming where it hid the top icons on devices.
• Fixed an issue with the RedFox family occasionally being considered as incompatible with WeOS 4.33.2.
• Fixed an issue with the devices list where the Refresh context menu option was occasionally not present.
• Fixed issues with FRNT configuration.
• FRNT Configuration: Focal point is now indicated.
• FRNT Configuration: Selecting a device now selects it in the topology/devices.
• Improved performance of LLDP frame receiver.
• Improved the performance of Project file Loading and Saving.
• Improved the performance of many WeOS5 associated operations.
• Made navigation menu collapsible.
• Merged communication summary and communication details into one view.
• Merged firmware download settings and firmware download status.
• Moved Discovery into separate panels.
• Moved Project Gold file into separate panels.
• Moved Reports into a panel.
• Moved unreachable device notifications to issues.
• Moved to Velopack as installer.
• New startup screen.
• Notification badge color now reacts to the intensity of notifications.
• Prevented PC from going to sleep during a firmware upgrade sequence.
• Prevented downgrade of WeOS bootloader below barebox 2017.12.0-6.
• Rearranged VLAN editing interface.
• Reworked Firmware Upgrade into a Staged Task.
• Reworked Logging configuration into a Staged Task.
• Reworked SNMP configuration into a Staged Task.
• Rings are now rendered in physical network and can be selected / dragged.
• Reset layout button added to backstage.
• Split "Selected device" into multiple panels.
• Split "selected device" into multiple different panels.
• Subnets are now rendered in physical network and can be selected / dragged.
• Text in communication summary/details is now copyable.
• The "CLI" panel has been renamed to "CLI Scripts".
• Unified list views across many panels to have a similar look and feel.
• Updated DSL connection visualization.
• Updated General log to improve performance and appearance.
• Updated project serialization to version 3.1.
• Updated target runtime to .NET 9.
• Updated how unknown devices are rendered in the topology when their MAC is a known OUI.
• WeConfig now remembers the last selected interface if it is disconnected and then reconnected.
• WeConfig will now prompt the user for trust when attempting to send non-factory-defaulted credentials to a device with an unknown/unrecognized host key.