Skip to main content

4 posts tagged with "2.1"

View All Tags

WeConfig 2.1.3 Changelog

Changelog​

Improvements​

  • Adjusted the radius of "Distribute Radially" to be better aligned with the actual size and centers of the topology nodes.
  • Adjusted ring alarm triggers for 5.27.0+ devices to match the updated WeOS behavior where condition is no longer supported.
  • Adjusted WeOS 4 Firwmare upgrade steps to run in the order bootloader -> primary -> secondary rather than primary -> bootloader -> secondary.

Bugfixes​

  • Fixed a crash that occured on rare occassion when deselecting a large number of devices in the topology view.

WeConfig 2.1.2 Changelog

Changelog​

Improvements​

  • Added support for labeling FRNT "Broken Ring" SNMP traps.
  • Disabled CPU-Bandwidth configuration on WeOS 5.27.0 and later devices, as this feature is no longer supported.

Bugfixes​

  • Fixed an issue where WeConfig would fail to properly present the RSTP configuration state for certain WeOS4 versions.
  • Fixed an issue where WeConfig would fail to properly calculate upgrade steps for WeOS5 devices when a package required a lower version for which not all platforms were supported.

WeConfig 2.1.1 Changelog

Changelog​

Improvements​

  • Preselected the primary address when adding the first static address in WeOS4 VLAN configuration.
  • Added labels for FRNTv0 M and N ports.
  • Ensured aggregates apply in network order.
  • Removed the extra space in the FRNTv2 title bar.
  • Improved formatting in the Password Update Needed dialog.

Bugfixes​

  • Fixed an issue where duplicate port definitions from WeOS devices would prevent WeConfig from processing LLDP information.
  • Fixed an issue in the handling of reading existing ports from WeOS devices running 5.25.0 through 5.26.1.
  • Fixed an issue that resulted in faulty calculation of WeOS4 upgrade steps.
  • Fixed an issue where the Communication Summary did not update properly when opening it with a device preselected.

WeConfig 2.1 Changelog

Highlights​

Changelog​

Backstage Menu​

  • Moved firmware tab to the About page

Context Menu​

  • Added Context Menu to Import Backup configuration onto a device
  • Added Context Menu to Edit FRNT Ring

Device Access​

  • Allow overriding used SNMP port and timeout

Device List​

  • Added secondary version and bootloader version

Diagnostics​

  • Hover-legend is now scrollable for large amount of devices
  • Added time-scale zooming

Discovery​

  • Merged Interface based and IP-Range based discovery into one view
  • Can now set Auth as part of the discovery process
  • Added proxy-ssh via known devices
  • Moved creation of Link-Local into adapter settings
  • Physical network view gets focus on completed device discovery

Firewall​

  • Added firewall rule generator
  • Added firewall advisories
  • Added new tab: Conntrack
  • Can create rules from Conntrack entry
  • Added option to merge rules if possible
  • Firewall configuration is now serialized to the WeConfig project
  • Added horizontal scrollbars

Firmware Upgrade​

  • Shows the order devices will be updated (based on chosen algorithm)
  • Added option to stop on first fail
  • Changed "Choose" icon to "Checkmark" icon
  • Added a search-box for filtering devices
  • Allowed step calculation to use the optimized 'all' command when possible.

Licensing​

  • Added support for License Keys
  • Changed license text from Active/Expired/Inactive to Pro/Basic
  • Moved "Device Discovery" to top level in the navigation tree
  • New text and icons for Favorites

New Devices​

  • RedBox

New Views​

  • HSR/PRP
  • VRRP
  • Alarm

Notifications​

  • The badge is now hidden when 0 notifications are available
  • Security advisories are no longer notifications (they can now be found under Issues)
  • Flag color changes depending on type of notification

Physical Network​

  • New route visualization
  • Added button to export topology as PNG
  • Increased the horizontal size of the zoom slider
  • Added options for Auto Layout to control how spread out the devices are placed
  • Added option to hide subnets with only one device
  • Performance: Made a better implementation of GetEnumerator for subnet
  • Performance: Improved RouteBuilder

Port Protection​

  • Added a button to restore "Disable Unused" clicks

Port Ingress / Egress​

  • Changed the active ingress/egress display rate to be in bits-per-second rather than bytes-per-second

Project Template​

  • Topology is centered on devices after build
  • Added option to use existing backups when exporting
  • Added option to verify version when importing
  • Performance: Build Network From Template is faster and requires fewer temporary ip addresses

Recent projects​

  • Added preview thumbnails

Reports​

  • Have been entirely reworked, allowing users to create their own report templates.
  • Added default report templates for common use-cases, matching preexisting reports.
  • Report previewer is gone, prints directly to PDF.

Route Table​

  • WeConfig can now display the local PC's route table.
  • Added button to auto-refresh route-table.
  • Route Table serialization has been improved for better accuracy and compatibility with various WeOS versions.

Settings​

  • Clarified diagnostic log history setting
  • Added configurable ping timeout
  • Added network concurrency limit setting
  • Added SNMP port and timeout settings
  • Edited but unsaved settings now has a colored border

Syslog​

  • Added error message if the computer's firewall is blocking incoming syslog messages

Traceroute​

  • Devices are now highlighted when selected by traceroute

Traps​

  • Added error message if the computer's firewall is blocking incoming trap messages

UI​

  • Added manual close button to popups
  • IP boxes now allow leading 0's
  • Expander now looks better in Light Mode
  • Added a dedicated CIDR input box

VLAN​

  • Changed address fields to use a CIDR component (was free text before)
  • Added button to add VLAN to all selected devices
  • Ports are now expanded by default
  • Added separators in the port list for visual clarity
  • Show a warning if the VLAN is blocked by the firewall
  • Aggregated ports can now be configured by clicking their child-ports

WeOS Versions​

  • Added WeOS 5.26 specific CLI parsing

Bugfixes​

  • Resolved an issue where the OSPF protocol was parsed as Any in the firewall
  • Resolved an issue in Firmware Upgrade where the "Download now" button did not display error messages
  • Resolved an issue in Firmware Upgrade where the "Download now" progress text would show text from all downloads
  • Resolved an issue with null-references in ApplicationDiagnostics
  • Resolved an issue with null devices in a subnet
  • Resolved an issue with null-references when selecting a route
  • Resolved an issue where LLDP-frames could cause issues when trying to add a connection
  • Resolved an issue where WeOS5 Radius Support was not showing
  • Resolved an issue where Automatic Firmware settings didn't respond to apply properly
  • Resolved an issue where SNMP settings didn't load from old project files
  • Resolved an issue to add safety checks to make sure DeviceIconsCache does not crash
  • Resolved an issue where running CLI Scripts in network order sometimes didn't work
  • Resolved an issue where a device's manufacturer was not always set correctly
  • Resolved an issue where a device's temperature was not set correctly on WeOS4 devices
  • Resolved an issue where descriptions in the issue list didn't linebreak properly
  • Resolved an issue where port selection in RiCo used too small dropdowns
  • Resolved an issue where removing SNMP from a VLAN would delete all SNMPv3 users
  • Resolved an issue where old backups could not be imported
  • Resolved an issue where locking the topology did not affect subnet- or ring dragging
  • Resolved an issue where automatic firmware download did not stop ongoing downloads when changing to "never"
  • Resolved an issue where manually added devices did not get properly overridden when something is discovered on their IP address
  • Resolved an issue where WeConfig sometimes would freeze during Firmware Upgrade
  • Resolved an issue where it was not possible to change tagging of Aggregated ports in VLAN configuration
  • Resolved an issue where some versions of WeOS did not report ports correctly