Skip to main content

One post tagged with "2.5"

View All Tags

WeConfig 2.5.0 Changelog

Highlights​

  • LLDP Neighbors — A new per-device view shows LLDP neighbors and supports refresh and CSV export.
  • Ring Topology — MRP rings are shown in the Physical Network view, and partial FRNT rings can be edited.
  • Firewall — Configure custom protocol numbers and DSCP marking with prerouting rules on WeOS 5.30 and later.
  • Device Configuration — Configure additional WeOS 5 alarms and VRRP startup delay on WeOS 4.35 and later.

Changelog​

LLDP Neighbors​

  • Added a per-device view showing local and remote ports, neighbor information, and whether a neighbor is already in the project.
  • Refresh the view manually or at a selected interval, and export neighbor information to CSV. Exports are also added to the project attachments.

Physical Network and FRNT​

  • The Physical Network view now displays detected MRP rings alongside FRNT rings.
  • The FRNT view can detect and edit partial rings, change a ring's focal point, and uses the same ring detection as the topology.

Firewall​

  • Added support for custom IANA protocol numbers in firewall rules.
  • Added prerouting rules for DSCP marking on devices running WeOS 5.30 or later.

Alarms and Routing​

  • Added Storm Detection and Link Health alarm configuration for supported WeOS 5 devices.
  • Added VRRP startup delay configuration for devices running WeOS 4.35 or later.
  • Static routing now offers a list of the device's interfaces instead of requiring an interface name to be typed.

Firmware and Device Support​

  • When a firmware upgrade requires TFTP, the wizard now asks for the TFTP server IP address before continuing.
  • Improved recognition of NeOS versions, software classes, and firmware packages, including the use of appropriate default credentials.
  • Implicit MRP licenses are now recognized on NeOS devices.

Device List and User Interface​

  • Added a Serial Number column to the Device List.
  • Application Settings now opens as a dockable tab and is available from the navigation panel.
  • Moved the navigation search field to the top of the panel.
  • Input validation messages are displayed when a field is focused or hovered.
  • Backup operations now show outcome notifications, including successful, failed, and partially successful backups.
  • Navigation entries indicate when a view is unavailable because of licensing.
  • Empty dock panes collapse and are recreated when needed.

Platform​

  • Default firmware folder and external editor settings now depend on the operating system.
  • Reduced the application size by replacing a dependency.

Bugfixes​

  • Fixed an issue where refreshing an unreachable device could apply stale IP configuration data.
  • Improved IP configuration and HTTPS compatibility on Linux, including connections to older devices.
  • DHCP can now be selected immediately in the network interface editor.
  • SNMP port and timeout settings are now correctly retained and shown in Discovery and Device Access.
  • Corrected Apply button behavior in Firmware Upgrade and multiple configuration views.
  • Fixed an issue that could prevent a WeOS 4 bootloader upgrade when the selected firmware version was already installed.
  • Corrected firmware upgrade step calculation for versions with suffixes.
  • Fixed loading firewall settings from older project files.
  • Fixed diagnostics graphs stopping their time axis after zooming.
  • Fixed unexpectedly wide Device List columns after reloading and added horizontal scrolling for wide VLAN lists.
  • Fixed the display of down or partially down aggregate links and port-label visibility for newly added connections in the Physical Network view.
  • Prevented LLDP refreshes from unnecessarily overwriting previously known information.
  • Corrected Merlin SNMP handling for chassis, model, and firmware information.
  • Device families are no longer displayed as model names when a device does not report a model.
  • Improved handling of SNMP traps with missing optional fields and parsing of device JSON and alarm data.
  • Opening SSH access no longer crashes when an SSH client is not installed.
  • Fixed delivery of the offline user guide and changelog PDFs, and inclusion of log files in support files for vendor-branded versions.